Fine Tool Journal Here comes my RSS info https://www.finetooljournal.net/ 1970-01-01T00:00:00+01:00 FeedCreator 1.7.3 7303-313 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17105/7303-313 *7303-313 Lot of three pressed steel block planes. A STANLEY No. 101P and No.H101P and an unmarked one with 4-1/4" sole. (NPO076) 15-30 7303-312 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17104/7303-312 7303-312 Lot of two adjustable block planes. A CRAFTSMAN low angle, clean. A MILLERS FALLS No. 47 knuckle joint with 90% japanning and good plating. Has a few surface rust spots on sole. (NPO046) 30-60 7303-311 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17103/7303-311 7303-311 Lot of three block planes. STANLEY Nos. 110 and 220, both have surface rust but 110 is in rougher shape and has chip in knob. Plus a SARGENT No. 307 low angle with 90% japanning, adjustable throat, has small hole in cutter beneath mark (NPO045) 30-60 7303-310 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17102/7303-310 7303-310 Lot of two STANLEY adjustable block planes. A No. 65 knuckle joint with good plating and good japanning. And a No. 16 with Sweetheart cutter, good japanning and plating but a few spots of surface rust. (NPO039) 75-150 7303-309 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17101/7303-309 *7303-309 Lot of two CRAFTSMAN knuckle joint block planes. Similar to Stanley No. 18, adjustable throats, plating on one is good and mostly worn on the other, japanning ok on both. (NPO047) 20-40 7303-304 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17096/7303-304 *7303-304 MARSHALL WELLS ZENITH No. Z23. Likely made by Sargent, has Zenith cutter, japanning 95% and wood has minor dinging. (NPO258) 25-50 7303-301 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17093/7303-301 7303-301 STANLEY No. 45 combination plane. Type 7, long rods only, plating 80%, tote good with nice sapwood streak but also has some green paint splotches. Missing rear depth stop and slitter. (MCH105) 50-100 7303-300 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17092/7303-300 7303-300 STANLEY No. 45 Type 1 combination plane. Long rods only, japanning 80%, only has one depth stop. Wood ok, metal has some oxidation. (MCH095) 70-140 7303-299 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17091/7303-299 7303-299 STANLEY No. 45 combination plane. Type 14, long rods only, plating 75%, missing slitter but has depth stops, wood good. (MCH102) 60-120 7303-298 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17090/7303-298 7303-298 SARGENT No. 44 veneer scraper. Uncommon scraper similar to the Stanley No 12-1/2 with wood sole. Proper marked blade, japanning 95% and wood has minor wear. (NPO172) 125-250 7303-297 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17089/7303-297 7303-297 SIEGLEY No. 2 plow plane. Later type with clover pattern on skate. Traces of japanning, rosewood on fence has some dinging and user name stamped into it. Some spots of rust. (NPO) 50-100 7303-296 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17088/7303-296 *7303-296 UNION No. 21 transitional smoother. 7" long with proper marked cutter, japanning 80% and wood has mild dinging. (NPO075) 25-50 7303-295 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17087/7303-295 7303-295 Set of STANLEY No. 98 and No. 99 side rabbet planes. No. 99 is a type 1 and No. 98 is a type 2, plating 70-80%, wood has some dinging and wear. (NPO162) 50-100 7303-294 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17086/7303-294 7303-294 STANLEY No. 95 edge trimming block plane. Sweetheart mark on cutter, later type, japanning 50%. (NPO053) 40-80 7303-293 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17085/7303-293 7303-293 STANLEY No. 65-1/2 low angle adjustable block plane. Vee mark on cutter, japanning 80%, one splotch of white paint and a few spots of surface rust. (NPO044) 40-80 7303-292 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17084/7303-292 7303-292 STANLEY No. 92 cabinet maker's rabbet. Made in England, plating 98%. (CBM178) 30-60 7303-291 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17083/7303-291 7303-291 KEEN KUTTER No. 55 jointer gauge. Some surface rust and one lever looks likes it is replacement as it is japanned and the other is nickel plated. (RRT438) 30-60 7303-290 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17082/7303-290 7303-290 STANLEY No. 12-1/4 veneer scraper. Later type with sweetheart mark on cutter and on cap screw, 99% japanning. Missing wood handle. Inside base of original paste board box with wax paper. (RML223) 75-150 7303-289 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17081/7303-289 7303-289 STANLEY No. 50 light combination plane. WWII era model with hardwood tote, japanning near complete and tote has mild wear. Includes set of 16 cutters (one cutter missing) inside original wood box with good label. One spur is missing on plane. (NPO150) 100-200 7303-288 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17080/7303-288 *7303-288 STANLEY No. 12 veneer scraper. Sweetheart mark on cutter, circular Stanley mark on cap screw, Japanning 85%, wood good. (RCH007) 25-50 7303-287 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17079/7303-287 7303-287 SARGENT VBM No. 42 veneer scraper. Proper marked blade, japanning 90%, wood is possibly replaced. A few spots of discoloration on metal. (CBM413) 40-80 7303-286 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17078/7303-286 7303-286 Lot of two No. 4 sized smoothing planes. A SIEGLEY No. 4C, japanning near complete, wood good with a few dings, proper cutter. And a STANLEY Two-Tone with good maroon japanning on bed and yellow chip breaker, wood has minor wear and one spot of discoloration on sole. (NPO025, NPO026) 35-70 7303-285 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17077/7303-285 7303-285 Lot of two bench planes. A WINCHESTER No. 3005 smoothing plane, 10" long, proper marked blade and lever cap, japanning 90% and wood has some chipping to lacquer. A SARGENT No. 414 jack plane, later type. Moderate flaking to lacquer, japanning 95%, some surface rust. (NPO073, NPO074) 60-120 7303-284 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17076/7303-284 7303-284 STANLEY No. 604 Bedrock smoothing plane. Type 3 with japanning near complete, wood has minor wear, a few spots of surface rust. (NPO290) 75-150 7303-283 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/auction-list/viewbids/17075/7303-283 *7303-283 KEEN KUTTER No. 5C jack plane. Proper marked cutter, japanning good, wood has moderate wear and dinging. Minor surface pitting on sole. (NPO287) 25-50